Troubleshooting the error code 4404

Turning off the camera system is one of the first things you should do to avoid this problem. Also, check certain that all of the device's wires are disconnected. After that, leave the camera alone for a few minutes.

You can now plug the wire in and power on the gadget after waiting 5 to 10 minutes. For a start-up, give it around two minutes. If you're using a wireless Arlo camera, remove the battery and wait 20 to 40 seconds before replacing it.

The firmware upgrade for the Arlo camera will commence automatically. Furthermore, the camera will connect to the Arlo base station during the update, and the LED lights will flash amber and blue.

No, simply wait a few seconds for the LED to turn off. Don't be concerned; this is very normal. The cameras will synchronise with the base station after the firmware upgrade is completed, and the LED will now glow blue.

The error code 4404 would be resolved as a result of this. However, if the error persists, you should contact the Arlo technical support staff.